Military Field-Grade Uninterruptible Power Supply (UPS)
SynQor’s Military Field-Grade Uninterruptible Power Supply units are designed for the extreme environmental and demanding electrical conditions of Military/Aerospace applications. SynQor’s UPS incorporates field proven high efficiency designs and rugged packaging technologies. This UPS will accept a wide range of input voltage and frequency values while delivering a well-conditioned AC output to the load. The use of lithium polymer batteries permits the lowest profile and lowest weight solution in its power class. It is designed to comply with a wide range of military standards. Options include two DC outputs, a DC input rated for military 28 VDC sources, and an electronic breaker on the AC output to permit fault-tolerant parallel operation for higher power and/or N+M redundant systems.
Product Features:
• Sealed, weather-proof, shock-proof construction
• Military Tough, Die-Cast Aluminum Chassis
• 1250W-1500VA; 2500W-3000VA output power
• >10 minute run-time at full power
• Full power operation -20°C to +55°C
• Shallow Rack full power operation -20°C to +50°C
• Storage temperature: -40°C to +65°C
• True on-line double conversion
• Hot swappable internal battery pack (lithium polymer)
• Universal AC input: 80-265VAC; 47-65Hz
• Dual input: AC and optional DC
• Cold-start with no AC or DC input connections
• Power factor correction at AC input
• Pure sinusoidal AC output voltage
• Handles 0.0 - 1.0 power factor loads and non-linear loads
• User I/O and Configuration signal ports
• Up to 3 units can be combined for higher power, voltage or a 3-Phase AC output
• Up to 32 units can be combined to form a higher power fault-tolerant, glitch-free system, perhaps with N+M redundancy, by ordering with the “AC Output Electronic Breaker” option and the appropriate configuration cable
Specification Compliance:
UPS units are designed to meet:
• MIL-STD-704F - Aircraft Electrical Power Characteristics
• MIL-STD-1399-300B - Interface Std for Shipboard Systems
• MIL-STD-1275D - Vehicle Electrical Power Characteristics
• MIL-STD-461F - Electromagnetic Interference
• MIL-STD-810G - Environmental Engineering Considerations
Options:
• DC input (28Vnom) for dual source
• 2U Extended battery pack gives >24 minutes of run-time (UPS-1500)
• Wide-range AC input frequency: 47Hz to 800Hz
• 115Vrms or 230Vrms AC output
• 50Hz, 60Hz, or 400Hz output
• DC1: Auxiliary isolated DC output (up to 500W)
• DC2: High power DC output parallelable for higher power (UPS‑1500 up to 1250W; UPS‑3000 up to 2500W)
• Shipboard version with floating neutral wire
• N+1 Redundancy
Ordering Information:
Brochure: https://www.synqor.com/document-viewer?document=UPS%20trifold.pdf